Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 52 results ...
AbulHassan, H S (2001) A framework for applying concurrent engineering principles to the construction industry, Unpublished PhD Thesis, , The Pennsylvania State University.
Akanmu, A A (2012) Towards cyber-physical systems integration in construction, Unpublished PhD Thesis, , Pennsylvania State University.
Balina, C M (2002) Using labor productivity data to evaluate the application of lean principles to the concrete construction process, Unpublished PhD Thesis, , Pennsylvania State University.
Bhawani, S (2021) A function-based lean construction methods ontology supporting the lean implementation planning process developed for construction projects, Unpublished PhD Thesis, , Pennsylvania State University.
Castronovo, F (2016) Assessing problem-solving skills in construction education with the virtual construction simulator, Unpublished PhD Thesis, , Pennsylvania State University.
Chen, C (2005) Entry strategies for international construction markets, Unpublished PhD Thesis, , The Pennsylvania State University.
Corbett, D I (1997) Quantifying quality in industrial construction, Unpublished PhD Thesis, , The Pennsylvania State University.
Dubler, C R (2011) Evaluating waste associated with building information exchange using lean theory, Unpublished PhD Thesis, , The Pennsylvania State University.
El-Aroud, A S (1980) Road network investment model for developing countries, Unpublished PhD Thesis, , Pennsylvania State University.
Enache-Pommer, E (2010) A synergistic approach to green building delivery, lean principles and building information modeling in the design of healthcare facilities, Unpublished PhD Thesis, , The Pennsylvania State University.
Franz, B W (2014) Modeling the role of team integration and group cohesion in construction project performance, Unpublished PhD Thesis, , Pennsylvania State University.
Gabrielli, M F (2009) Structural analysis of auction models, Unpublished PhD Thesis, , The Pennsylvania State University.
Gannon, E J (1998) A life-cycle cost model for use in the optimization of concrete bridge deck repair and rehabilitation, Unpublished PhD Thesis, , The Pennsylvania State University.
Gultekin, P (2015) An integrated process model and decision support system for energy efficient retrofits, Unpublished PhD Thesis, , The Pennsylvania State University.
Handojo, T (2001) The framework of a statistical acceptance plan based on the permanent deformation potential of asphalt concrete, Unpublished PhD Thesis, , Pennsylvania State University.
Hanna, A S (1989) An interactive knowledge-based formwork selection system for buildings, Unpublished PhD Thesis, , Pennsylvania State University.
Jafar Ramaji, I (2016) An integrated building information modeling (BIM) framework for multi-story modular buildings, Unpublished PhD Thesis, , Pennsylvania State University.
Jiang, L (2016) A constructability review ontology to support automated rule checking leveraging building information models, Unpublished PhD Thesis, , The Pennsylvania State University.
Jung, Y J (2007) Subsurface utility engineering for highway projects: A study of utility impact rating and benefit-cost analysis, Unpublished PhD Thesis, , Pennsylvania State University.
Kalamaras, G S (1996) A case method approach for interactive risk analysis of tunnel "design-for-constructability" concept, Unpublished PhD Thesis, , The Pennsylvania State University.
Kamel Hedayat Abad, M E (2017) Integration and interoperability of building envelope information and energy modeling, Unpublished PhD Thesis, , Pennsylvania State University.
Kerns, W R (1971) Criteria for determining economic priorities in awarding sewage facility construction grants, Unpublished PhD Thesis, , The Pennsylvania State University.
Klotz, L (2008) Process transparency for sustainable building delivery, Unpublished PhD Thesis, , Pennsylvania State University.
Konchar, M D (1997) A comparison of United States project delivery systems, Unpublished PhD Thesis, , The Pennsylvania State University.
Korkmaz, S (2007) Piloting evaluation metrics for high performance green building project delivery, Unpublished PhD Thesis, , The Pennsylvania State University.
Kreider, R G (2013) An ontology of the uses of building information modeling, Unpublished PhD Thesis, , Pennsylvania State University.
Kumar, S (2013) Experience-based design review of healthcare facilities using interactive virtual prototypes, Unpublished PhD Thesis, , The Pennsylvania State University.
Kuntz, K A (1994) A construction crew evaluation model to improve craft productivity, Unpublished PhD Thesis, , The Pennsylvania State University.
Lather, J I (2019) A hybrid modeling approach using discrete event simulation and layout optimization for healthcare layout planning problems, Unpublished PhD Thesis, , The Pennsylvania State University.
- Type: Thesis
- Keywords: bias; decision support; gender; optimization; population; healthcare; building information modeling; communication; decision making; integration; visualization; hospital; design decision; designer; professional; workflow; simulation
- ISBN/ISSN:
- URL: https://www.proquest.com/docview/2432920521
- Abstract:
The US is experiencing a growing population of older adults, increasing the demand on the healthcare system, and the Emergency Department (ED) serves as the main gateway for inpatient admissions. With this growing demand, EDs and hospitals are expanding and building new facilities at a growing rate. ED expansion and redesign is a complex design task which takes into account many operational processes (current and proposed) as well a projected changes in the system, e.g., patient volume. The effective layout of these critical departments in addition to the workflow processes that are hospitals influence the efficiency and effectiveness of delivering healthcare services. Yet, currently workflow processes and layout are not studied together. Workflow processes are studied via discrete event simulation in a static layout. Layout optimization finds an optimal layout given a static set of flow or adjacency data. The data from both methods need to be accessible and timely in delivery for effective use in the rapid pace of facility design. Given the lack of integration of computational facility planning techniques in the design and layout of healthcare facilities, new methods are needed to leverage data in the analysis planning and design decisions in timely ways. Computational models can be used to evaluate minimal distances or cost functions. Discrete event simulations can be used to model the stochastic nature of operations to check the impact on specific performance measures. Visualization can be used to immerse decision makers in the future environment to aid model validity, communication, and understanding. In this dissertation, the three techniques are investigated: discrete event simulation, mathematical layout optimization, and virtual visualization. First, layout implications in a discrete event simulation of an ED are studied so as to understand how the healthcare processes are impacted by layout decisions. Second, a layout optimization methodology leveraging the graph theoretical approach and a placement strategy is developed and connected to common parametric building information modeling (BIM) authoring tools for generating layouts with distance weighted adjacency step-wise optimality. Next, the use of generative layouts is studied with healthcare planning and design professionals. Finally, a framework for using these techniques in an integrated hybrid simulation modeling approach in the healthcare planning process is presented.The results for the study of layout in discrete event simulation show that not all layout consideration are additive. Two of five layout conditions contributed to the most amount of improvement over the baseline condition: results waiting (15.1% improvement on all patient length of stay - LOS) and admits zone (15.7%). A combined improvement was estimated to be 1.19 hours (23.9%) for overall LOS. The addition of fast track bays reduced the improvement by an estimated 10 minutes. The best scenario included care initiation, results waiting, and admits zone, and reduced overall LOS by 1.21 hours (24.3%). Study of space allocation and space utilization found additional fast track bays were not helpful and the results waiting was underutilized (max utilization = 7.40 people, a fifth of the seats available). Modeling the stochastic system of an ED in the context of the layout changes can help identify what changes contribute the most benefit, which changes are additive or compete, and help determine the space requirements and allocations through the analysis of projected operations in that facility, but needs operational process inputs and estimated new workflows.A new method for generating layouts was developed based on the graph theoretical approach for optimizing adjacency. The method uses an adjacency weighted distance score and a generative approach to create multiple layouts for review by designers and planners by translating space content into common parametric BIM tools. The results from the study of layout optimization and healthcare planners and designers is that the scoring metric a igns relatively well with expert opinions, but that more advances are needed to make generative layout methods more accepted by professionals. On average, respondents selected the ‘best’ layout marginally higher than random chance (proportion = 29.0%, expected = 16.7%). Respondents tended to choose the higher and lower scoring layouts, respectively: 65% of respondents selected either of the higher two options; 48% selected either of the lower two options, out of 6 options. Respondents found generative layouts promising for helping overcome design bias, however the current state of the technology would need additional development. Across all respondents experience, gender, and view on generative layouts, respondents wanted to understand the generative layout decision details. These layouts are based on adjacency ratings, which in an automated methodology could be updated through simulation.A hybrid modeling framework is presented which integrates simulation, optimization, and visualization modeling methods for healthcare facility layout planning activities for optimizing both process and layout. Objectives are presented to create a systems approach to the management, planning, design, construction, and operations of healthcare facilities. The main implications of this body of work are that layout and processes are paired, are in need of greater investigation, and an integrated approach is presented as a framework for healthcare professionals and researchers to guide the development of an automated decision support system for healthcare facility operations, planning, and design. These techniques, while described in a healthcare context, have implications for other domains where uncertain and latent processes are components of the layout decision making process.
Leicht, R M (2009) A framework for planning effective collaboration using interactive workspaces, Unpublished PhD Thesis, , Pennsylvania State University.
Liu, F (2015) Integrated change and knowledge management for energy efficient retrofit projects, Unpublished PhD Thesis, , Pennsylvania State University.
Luo, Y (2008) Decision support for prefabrication strategy selection on building systems, Unpublished PhD Thesis, , Pennsylvania State University.
Lynch, T D (1996) A transaction cost framework for evaluating construction project organizations, Unpublished PhD Thesis, , Pennsylvania State University.
Mace, B K (2001) A production control model for commercial construction, Unpublished PhD Thesis, , Pennsylvania State University.
Magent, C S (2005) A process and competency-based approach to high performance building design, Unpublished PhD Thesis, , The Pennsylvania State University.
McIntyre, C (1996) A decision support system for the residential land development site selection process, Unpublished PhD Thesis, , The Pennsylvania State University.
Messner, J I (1994) An information framework for evaluating international construction projects, Unpublished PhD Thesis, , Pennsylvania State University.
Mohammadpour, A (2014) Retrofitting healthcare facilities to enhance patient safety and energy efficiency, Unpublished PhD Thesis, , The Pennsylvania State University.
Mostavi, E (2018) Development of multiple criteria decision making instrument in designing of high performance commercial buildings, Unpublished PhD Thesis, , Pennsylvania State University.
Napolitan, C L (1995) Improvement to the forecast precision of the factor model for masonry productivity, Unpublished PhD Thesis, , Pennsylvania State University.
Nguyen, T-H (1999) Automated deduction of topological information in a computer-based building design system, Unpublished PhD Thesis, , The Pennsylvania State University.
Nikolić, D (2011) Evaluating a simulation game in construction engineering education: The virtual construction simulator 3, Unpublished PhD Thesis, , Pennsylvania State University.
Park, T i (2009) A comprehensive asset management system for sewer infrastructures, Unpublished PhD Thesis, , Pennsylvania State University.
Phelps, A F (2008) Lean information flow in complex healthcare projects and the role of the “integrator” as information flow manager, Unpublished PhD Thesis, , Pennsylvania State University.
Pulaski, M H (2005) The alignment of sustainability and constructability: A continuous value enhancement process, Unpublished PhD Thesis, , Pennsylvania State University.
Riley, D R (1994) Modeling the space behavior of construction activities, Unpublished PhD Thesis, , Pennsylvania State University.
Safari, M (2019) A regenerative approach to development and construction of building energy retrofit projects, Unpublished PhD Thesis, , Pennsylvania State University.
Sanders, S R (1989) An analysis of factors affecting labor productivity in masonry construction, Unpublished PhD Thesis, , Pennsylvania State University.
Solnosky, R L (2013) Integrated structural process model: An inclusive non-material specific approach to determining the required tasks and information exchanges for structural building information modeling, Unpublished PhD Thesis, , Pennsylvania State University.
Sprau Coulter, T L (2014) Improving energy audit process and report outcomes through planning initiatives, Unpublished PhD Thesis, , The Pennsylvania State University.
Syal, M G (1992) Construction process knowledge model to assist method selection in project planning, Unpublished PhD Thesis, , Pennsylvania State University.
Uhlik, F T, III (1984) Optimizing earthwork estimating for highway construction, Unpublished PhD Thesis, , Pennsylvania State University.